📄️ General settings
Setting display language and web interface behaviour
📄️ BACnet devices
You can have Jasper find BACnet devices on your network that were not configured when you added cards to Jasper. Once Jasper finds those devices, you can add them to Jasper using the instructions in Adding a card.
📄️ Scheduler
You can set daily and weekly schedules using Jasper. Since users can adjust these settings as well, you can find instructions for them in the Cristal Controls Jasper User Manual under the following headings:
📄️ Variables
You can adjust the attributes and behaviour of system variables on the dataserver to make your Jasper system better serve your particular application.
📄️ Lighting statistics
Building managers use lighting statistics to help them run their buildings efficiently. For instance, they may want to calculate electricity consumption through a given control, or they may want to determine when to relamp.
📄️ Load shedder
Jasper users need to track load shedder activity and may also need to change certain settings.
📄️ Scene controllers
This web page enables digital addressable lighting interface (DALI) scene commands like GOTO, STORE and REMOVE.
📄️ Sequencer
The sequencer runs ordered lists of variable writes, called sequences. Each sequence writes a series of values to dataserver variables, one step at a time, with a configurable delay before each step. A sequence starts, stops, pauses and resumes based on the value of a trigger variable, so you can drive it from a schedule, an alarm, a button on a floor plan or any other logic that can write the trigger variable.